xpress2 and xpress3 Belt Press

OR-TEC xpress:
A Double or Triple Belt Press for municipal and industrial wastewater plants

The OR-TEC xpress Belt Press System is the perfect double or triple belt press for the municipal and industrial wastewater treatment plants. It is designed to be easy to install, operate and maintain.

xpress2 Double Belt Press:

The xpress2 double belt press system configuration features two dewatering belts with a variable wedge zone for optimized dewatering. One button automatic start-up and shutdown, automatic belt tracking and a sludge cake monitoring system come standard and make operation straightforward and easy. The belt press can be supplied as a mobile unit and is compact enough to fit on or in a trailer that can be hauled with 1 ton pickup truck.

xpress3 Triple Belt Press:

The xpress3 is a three belt dewatering system. The unit has a independent gravity belt thickening zone. This gravity zone allows sludges to be pre-thickened prior to dewatering. Because the gravity zone is independent it can be operated at different speeds from the dewatering section of the belt press. The independent gravity zone is then followed by an independent double belt press section where the thickened sludge is further dewatered. The xpress3 triple belt press is particularly useful for operations with sludges with lower inlet solids concentration or where pre-thickening is critical.

The belt press is constructed entirely of stainless steel and can be provided as a stand alone unit or as a complete turnkey system with all equipment required for dewatering, factory mounted, piped and wired on a stainless steel skids.

The OR-TEC xpress features include:

  • Gravity Zone with plows and dewatering roller
  • Variable Wedge or low pressure zone
  • High Pressure 5 roller squeezing zone
  • Auto start-up, run and shutdown
  • Automatic Belt Tracking
  • Sludge Cake Monitoring System
  • No Hydraulics
  • Optional three belt configuration

Additional Features:

  • Fully automated easy to use Touchscreen Controls
  • Skid mounted, turnkey, factory tested complete system
  • Stainless steel frame, flocculation tank, mixers, rollers, pans, trays and fasteners
  • Highest quality pumps, motors and geardrives
  • OR-TEC designed and manufactured Polymer Dosing system and Screw Auger ensures 100% equipment compatibilty
  • Onboard flow meters
  • Available with SCADA ready controls
  • Many other features and configurations available

All OR-TEC Belt Press Systems are designed, engineered, manufactured and assembled in the USA

Made in USA